Camera PTZ mCAM II

Image Quality

The PTZ Camera mCAM II is equipped with a professional 1/2.7 inch image sensor with Full HD 1080p output resolution.

The sensor provides high color reproduction, high-definition signals, and crystal-clear image quality.

Easy integration

With IP control and power supplied through the PoE+ (Power over Ethernet), this camera can be installed at a reduced cost, and the MULTICAM system is able to drive a large set of cameras without additional hardware. Thanks to the additional licence MULTIROOM, you can switch between configurations using different sets of cameras.



Full-HD picture with HD-SDI connector and IP H.264 stream.
® stream available with special licence.

Control via Visca or IP interface to control the camera.

You can use this camera with IP Box and a single ethernet cable for video signal, camera control and power supply.

Available in White and Black.

Sensor 1/2.7” 2MP CMOS
Video Output 1080p 60 / 59.94 / 50 / 30 / 29.97 fps, 1080i 50 / 60 fps, 720p 60 / 59.94 / 50 fps
Optical Zoom x12/24
View angle 72.5°
Panning Angle -170° ~ +170°
Tilting Angle -30° ~ +90°
Preset Positions 255
POE PoE+ (IEEE802.3af)
Camera Control RS-232 / RS-422 / Ethernet
Focal length f = 3.5 ~ 42.3 mm
Aperture F1.8 ~ F2.8
Minimum Object Distance 1.2m
Weight 1.35kg

NDI is a registered trademark of NewTek