Interface

multiCAM TRACKING has two modes: Manual (See Manual Mode) and Auto (See Auto Mode). Each mode has a specific interface.

Manual mode interface

1 - General controls zone

Here you can enable or disable automated mode (see Auto Mode), start, stop and configure recording (see Recording) and streaming (see Live Streaming), set up joystick (see Controller configurations), and control audiomixer (see AUDIO MIXER).

2 - Compositions preview zone

Here you can see previews of the PC input and available compositions.

3 - Master output

The PGM output preview.

4 - Camera presets preview zone

Here you can see previews of the camera presets.

Automated mode interface

1 - General controls zone

Here you can enable or disable automated mode (see Auto Mode), start, stop and configure recording (see Recording) and streaming (see Live Streaming), set up joystick (see Controller configurations), and control audiomixer (see AUDIO MIXER).

2 - PC-input preview zone

Here you can see previews of the PC input.

3 - Master output

The PGM output preview.

4 - Tracking detection zone

Here you can see how tracking is working..