Audio settings
From the system welcome screen (see System LaunchAllumage.htm), click onto open "Settings".
You will be asked to enter a password:
- To access generally used settings, type “admin”
- To access all possible settings, type “superadmin”
Types of audio sources
There are 4 types of audio sources available:
- Analog inputs: 2 Mics (Mono) and 1 line (Stereo)
- AES
- SDI embedded
- AOIP
To embed an analog or AES input to PGM, one of the video inputs should be connected to the SDI IN 1 (DeckLink Studio 4K)
Analog, AES, SDI embedded audio configuration
To enable Analog, AES or SDI embedded audio input, click on inside Input 1 (DeckLink Studio 4K) row.
Click on the left to open INPUT CONFIGURATION
Using the Select input type drop-down menu, choose required type of the input.
Audio delay can also be adjusted here if needed.
Only embedded audio available for other SDI video inputs, all NDI and IP sources.
Audio external devices configuration
Audio external devices can be used to integrate multiCAM to an AOIP environment or for multiCAM IP BOX audio configuration.
Types of audio external devices
External audio devices that can be used:
- USB sound card
- AOIP driver
- Audio inputs on the motheboard
- Other audio devices,which could be detected by Windows
Add an external audio
The audio external devices area is located on the top-right part of the interface.
To add a new audio input, click on and choose required input
Audio playback configuration
Types of audio playback devices
Types of playback devices that can be used:
- USB sound card
- AOIP driver
- Audio inputs on motheboard
- Other audio devices, which can be detected by Windows
Add a playback audio
The audio playback area is located on the middle-right part of the interface.
To add a new audio output, click on and choose required output
Audio outputs mapping
Audio outputs mapping allows you to configure the inputs/outputs audio matrix inside the system. It could be useful if it is necessary to send some specific audio input to specific audio output.
To configure mappings, click on and manage inputs and outputs inside the interface.